Packs Infotel - Home of the M30 Autodialler
Packs Infotel
Products
Alarm Systems
Packs Infotel ltd, 1 Broomfield hall Buildings, London road, Sunningale, Ascot, Berkshire, SL5 0DP
Send an Email to Packs Infotel
Click here to get Directions to the Packs infotel office
ApAlarms
Click here for your Domestic security needs
Quad Beams

 The Best way to Protect the Perimeter of your Premises

Picture of a quad beam

Quad Beams Provide the best and most reliable Protection for external applications as they detect an intruder before he gains access to the buildings. Quad beams also protect stock and machinery  left in the open.

Quad Beams use beams of infra red light which travel from the transmitter to the receiver. Reliability is excellent and false alarms are very rare.

Picture of a quad beam

When Fitted Correctly Birds and small mammals such as badgers, foxes, rabbits etc. Do not give false alarms. Even falling leaves and flying debris do not affect the quad beams, as long as not more than  90% of the beams are broken at one time.

The Quad Beams Come in three ranges 50 meters, 100 meters and 200 meters.

Quad beams working

 Quad Beam Features

 4 SYNCHRONISED HIGH POWER INFRARED

  • 4 beams are "and-gated", which helps to prevent false alarms from falling leaves and small animals.
  • The active infrared transmission is exceptionally strong with a maximum arrival distance ten times greater than the specified protection distance.
  • External light compensation circuit provides excellent tolerance against sunlight, automobile headlights, fluorescent light or mercury light.

 FOUR FREQUENCIES SELECTIONS

  • 4 separate frequency choices avoid cross-talk in stacked or long linear installations.

 BEAM TRANSMISSION STRENGTH SELECTION

  • 2 levels of beam transmission strength can be set to suit the protection distance.

 AUTO-GAIN LOCK

  • Optimal sensitivity gain is automatically set at any coverage distance up to the maximum protection distance. Auto-Gain lock is easily confirmed by sound check.

 EASY BEAM ALIGNMENT

  • Audible signal for alignment (Utility model). An alignment tone enables quick set-up of the beams. The tone becomes maximum at peak of beam level.
  • Sensitivity attenuation LED lights when beam level is attenuated, which shows low sensitivity.
  • Monitor jack output.

 PROGRAMMED AGC

  • Sensitivity is automatically increased in bad weather to contend with fog, heavy rain, frost or snow.

 ALARM MEMORY

  • Alarm memory LED located on receiver can be automatically reset (5 mins after alarm, if flickers for 55 mins, then automatically resets) or can be manually controlled.

 ENVIRONMENTAL MODULE BUILT-IN

  • Environmental trouble signal is sent when beam reception level is reduced below an acceptable level.
  • Wide adjustment (horizontally ±90°, vertically ±10°).
  • Tamper output.
  • Polycarbonate cover excellent at anti-shock.
return to top of page

Click Above to Return

[Packs Infotel] [About US] [Products] [NIMRUS] [News] [Articles] [Customers] [Site Map] [Privacy Policy] [Links]

(c) Copyright  1998 - 2007 Packs Infotel Industrial Alarm Autodiallers

Information in this Web site is subject to change without notice. No part of this Web site may be reproduced or transmitted in any form or by any means, electronic or mechanical for any purpose, without the express permission of Packs Infotel Limited.

Packs Infotel Ltd, 1 Broomfield hall Buildings, London road, Sunningdale, Ascot, Berkshire, SL5 0DP

Website designed by Internetdesigns247.com